RXSOL-40-4010-025 Nitrite based closed circuit inhibitor 1000ppm at 1.00% RXSOL liquid evvt is a high performance nitrite based closed circuit inhibitor with indicator. Nitrite 1000ppm at 1.00%. lt is mulch-functional corrosion inhibitor for protecting recalculating cooling and heating water systems. RXSOL Liquid EWT treatment is an excellent treatment for diesel engine primary and secondary cooling water. It is also ideally suited for use in chilled water systems because it forms a clear, nonstaining solution, which protects the system from corrosion and hard water scale. Active Matter: 75-80 Packaging: 25.00 Ltr. Application: •RXSOL Liquid EWT is very useful for Maintaining Nitrate In MIE,A/E & Compressor Fresh Water Cooling System. RXSOL Liquid EWT treatment is an effective corrosion inhibitor for ferrous metals in marine circulating cooling water systems. Because certain aluminum alloys are highly anodize, they may be difficult to completely protect. Therefore, the use of RXSOL liquid EWT treatment with systems containing aluminum alloys should be discussed with a local Rx Marine Marine representative prior to starting treatment. In order to ensure the maximum benefits from a RXSOL Liquid EWT treatment program, the system should be inspected for deposits and corrosion. If the system is found to be contaminated, it must be chemically cleaned before the treatment program begins. Dose: •The system should be filled with good quality fresh or distilled water and where freeze protection is necessary, the proper amount of glycol-based antifreeze should be added. Begin circulating the system water, and add RXSOL Liquid EWT cooling water treatment at an initial dosage of 8 liters per ton of system water capacity. Circulate for 30 minutes after addition to ensure good distribution and the establishment of a protective film. Note : Features Benefits Effective corrosion inhibitor Protects ferrous and nonferrous metals Minimizes metal oxide deposits Contains a scale modifier Maintains heat transfer effectiveness Helps prevent overheating caused by sludge and mineral scale deposits Reduces cleaning and maintenance costs Liquid Easy to dose Cost effective Buffered Stabilizes cooling water pH Technical Specifications: Appearance Light yellow liquid Specific Gravity at 25° C 77° F 1.23 Flash Point PMCC Hone pH, Neat 12.3 • 12.9 Freeze Point: •12.2°C 10° F Freeze/Thaw Stability Complete.